RL-Semi 2 Infusion Pump
Technical specification
Applicable Infusion Set : 1ml/15d, 1ml/19d, 1ml/20d, 1ml/60d
Infusion Rate : ml/h mode: 0.1~2000ml/h
drop/min mode:1~(400ml/h*d/60) d/min
Unit Conversion : Conversion between drop/min and ml/h
Bolus Rate& VTBI : Bolus rate: 0.1~1500ml/h
(Volume to be infused) VTBI: 0.1~50ml
FF Rate & VTBI : FF Rate: 0.1~2000ml/h
VTBI: 0.1~9999.99ml
KVO Rate & VTBI : KVO rate: 0.1~5.0ml/h
VTBI: 0.1~1ml
VTBI(volume to be injected): 0.1~9999.99ml
Cumulative Infusion Volume : 0.1~9999.99ml
Rate Accuracy : Rate≥1ml/h: ≤±3%(after calibration) Rate< 1ml/h: ≤±5%(after calibration)
Occlusion Pressure : 13 occlusion pressure levels
Air Bubble Size : 6 levels( 25ml, 50ml, 100ml, 250ml, 500ml, 800ml)
Alarms Information : Near infusion finished, Infusion finished, standby task finished, up occlusion, down occlusion, door open, air bubble, forgotten operation, battery low, battery empty, abnormal running state, equipment failure, power fault, unmatched infusion set, replace infusion set, drop sensor is pulled out, empty bottle etc.
Prompts : Parameters overrun, infusion start, AC power has been pulled out, speed overrun, installation error, maintenance cycle.
Power Source : Three options for power supply
First: 100~240VAC,50/60Hz;
Second: Inserted Li battery 11.1V, capacity³2600mAh; After the battery is fully charged, it can be used for infusion pump to work continuously for more than 7 hours at a rate of 25ml/h and for more than 5h at a rate of 2000ml/h.
Third: External DC 15V power supply
Drug Library : Up to 1000 drugs are provided.
Dimensions : 248mm(L) * 183mm(W) *83mm(H)
Contact: Mr. Jin
Phone: + 86 15951972343
Tel: + 86 15951972343
Email: jin@runlai-medical.com; rl_medical@126.com
Add: ZhangJiaGang City, Jiangsu Province, P.R.China PC:215600